We're glad you asked! A SpinTopSign is a modern take on real estate "For Sale" signage! A cylinder sits atop our signpost and displays home images, information, and home buyer resources. A SpinTop holds six 8 x 10 images of your choosing. An eye-catcher like no other, prospective buyers are enticed to come up for a closer look, spinning the sign to instantly see the most appealing aspects of your listing. Oh, and we forgot to mention, our SpinTopSigns have a solar-powered lid that enables them to light up from the interior at night, producing an elegant glow that won't disturb neighbors, but will greatly increase the number of hours that you're able to market your listing! 

The SpinTopSign has been designed with harsh weather conditions in mind. It will withstand inclement weather, including rain, wind, snow and intense sunlight. Thick snow cover may reduce solar lighting capability.

No. Our SpinTopSigns have a solar panel lid which provides the energy needed to power the lights each night. 

Due to the location of the SpinTop, riders cannot be placed above the horizontal arm post. Typically, riders have holes on both the top and bottom to allow for placement beneath the horizontal arm post. 

You probably have not enabled your light feature yet! Don't worry, it's simple to do. Remove the lid of your SpinTop, and unscrew the white post attached to the bottom of the light fixture. On the bottom of the light fixture, you'll find a button which just needs to be pressed once to enable. Refer to Step 3 of the Image Insertion instruction on our How It Works page.

Yes, you have the ability to disable the light feature. Simply unscrew the cylindrical tube from the base of the light to expose the button. Press the button once to disable the light feature, and press again to re-enable. 

Your SpinTopSign holds six 8" x 10" images. For the best results, use matte photo paper without a watermark. 

No, SpinTopSigns rotate either via wind power or manually by prospective buyers. They are equipped with two exterior "wings" to help catch the wind. 

Although it is dependent on weather conditions and daily sun exposure, your SpinTopSign should remain lit for an average of three to four hours each night.

The SpinTopSign accommodates signboards up to 26" in width, though we recommend 24" wide signboards. There are two sets of holes in the horizontal arm, from which to hang your signboard, and this allows three ideal width options for signboard holes to be cut: 14", 15.5", or 17".

It sure does! There is a pin inside of the SpinTopSign topper, which prevents the topper from being lifted up and off of the bracket it sits on. There is also a pin that runs through the vertical post and SpinTopSign bracket. The end of this pin has a hole with a supplied cotter pin. For added security, you can replace this cotter pin with a small luggage lock such as the one found HERE.

We're so glad you asked, and yes, you can! Visit our affiliate page HERE.